How to Pop Lenses Out of Glasses: Complete Step-by-Step Guide

It can be challenging to remove your glasses’ lenses without harming the frame, whether you need to do so because of an altered prescription or an accident. But if you know the appropriate tricks, you can complete it in a few easy steps on your own. This page has four instructions on how to pop the lenses out of glasses. So, if you are looking for a solution to this kind of problem, you are in the right place.

The frames have the following options:

Polymer Frames
Metal Frames
Frames made of nylon
Frames Without Rims

How to Pop Lenses Out of Glasses: How Are the Lenses Removed from Polymer Frames?

The lenses usually fall out even if you don’t apply heat to your plastic frames. Firstly, I have a heat-free guide for you because a rise in temperature runs the risk of irreversibly damaging the lens coating:

Rotate the glasses so that the side facing your eyes is in focus.
Put both of your thumbs where the above picture indicates.
The other fingers are in contact with the spectacles’ other side’s frame.
Using your fingers, apply pressure now to make the lenses come out.

You can apply pressure to the center of the upper part of the lenses if this does not work. Many online tips advise using a hairdryer or some warm water to slightly reheat your glasses. The key thing to remember when using heat is to always stay cool. The frame’s substance or the coatings may deteriorate if you heat them too much. With most plastic frames made of acetate, it should be okay to apply a little heat, depending on what you’re holding in your hands.

How Are Lenses Taken Out of Metal Frames?

To release the rim lock on several of the metal frames, a screwdriver is necessary. If you need a slotted or cross screwdriver, just take a look at the tiny screw:

Position the frame securely to prevent it from slipping off with the screwdriver.
Press your thumb against the lens close to the rim lock to secure it.
Holding it with its left hand opens it.

You will likely need to take the lenses out if you can’t locate any screws or the rim lock around the metal frame (typically they are located on the side of the temples). The method with the plastic frames functions precisely as previously mentioned.

Frames Made of Nylon: You Can Remove the Lenses if the Nylon Thread Comes Loose:

Typically, a tiny transparent nylon thread in the lower portion of your spectacles holds the lenses in place when you wear nylon frames. For this task, get out a firm plastic strapping band. You must carry out the following actions to take the lenses out of these glasses:

Take hold of the lenses and gently yank the frame slightly away from them.
In doing so, a tiny space opens up between the lens and the frame.
position the plastic band between the lens and the frame.

The majority of the nylon thread is located at the bottom of the frame, so pull the plastic band down there.
Now, you can pull the nylon thread gently to remove it with ease. You can take off the lens in this manner.

Frames Without Rims

Many rimless frames use nuts and screws to secure the lenses. particularly the nuts, which are frequently very small (1,2 mm or 1,4 mm). Therefore, before attempting to remove the lenses from those glasses, be ready with the appropriate equipment. For the most part, inexperienced users are likely to slip and scratch their lenses.

You will have to deal with the challenge of rotating the screw while securing the nut from the opposite side when using rimless frames that secure the lenses using nuts and screws. Therefore, tape the lens surface before slipping off to prevent scratches if something goes wrong.
It’s likely impossible to take the lenses out of your glasses if they are affixed to the frame by a plugin system. since installing the lenses again in this situation calls for specialized equipment and plastic sleeves.

Summary of How to Pop Lenses Out of Glasses

You should be able to remove your lenses effectively and safely by adhering to these three easy steps. Throughout this process, always remember to handle your glasses with care and give patience priority. In case you run into any issues, it’s recommended to get advice from an optical specialist.

FAQs on How to Pop Lenses Out of Glasses:

How Do I Take Out Lenses That Won’t Come Out?

Looking left will indicate that the lens is off to the right; looking down will indicate that it is trapped in your upper eyelid; and so on. After that, apply a saline multipurpose solution or rewetting drops, softly massage the eyes, and blink often. It will soften, become loose, and relocate to the center of the eye as a result.

When the Lenses Come Off, Can You Put Them Back In?

You may simply push the lenses back in with a slight pressure on the majority of plastic frames. If the lens burst out of the frame, it might have come loose because metal frames usually contain a little screw holding the lens in place. The right-sized screw and screwdriver ought to come with an eyeglass repair kit.

Can Ocular Lenses Become Stuck?

Drying out is the most frequent cause of a soft contact lens becoming stuck. The lens may adhere to the middle of your eye due to a lack of moisture. If you sleep with your contacts in, this could happen.

Why Do My New Glasses Seem So Bulky?

How Come My Glasses Are So Thick?
The higher the number, the more lens material is required since focusing power is produced by adding more curves to a lens to mirror the curvature of a healthy cornea. Accordingly, thick lenses are usually necessary for high prescriptions to provide the desired level of vision correction.

Also, Read:

Published On November 2, 2023

By Kosisochukwu Okeke